中埋式鋼邊氯丁橡膠止水帶完全變形縫，是在后澆帶等半完全縫形式上發展出來的一種較新型的變形縫模式，鋼邊氯丁橡膠止水帶完全變形縫在防裂縫、防滲漏、抗錯位、抗老化等方面較其它半完全縫有很大程度的提高。  福州洋里污水處理廠二期工程AAO生物反應池和二沉池設置了“二橫三縱”式結構全斷式柔性連接變形縫，結構主體自底板、池壁、頂板及渠道分為各自獨立的12塊單體，全段式柔性變形縫間均采用鋼邊氯丁橡膠止水帶連接。
Buried steel edge chloroprene rubber waterstop complete deformation joint and post pouring belt is in semi sewn completely a new developed form of the joint deformation mode, steel edge chloroprene rubber waterstop completely in deformation joint anti crack, anti leakage and anti dislocation and aging than other half the complete joints has greatly improved. Fuzhou ocean sewage treatment plant project phase two AAO biological reaction tank and two tank **p "two vertical and three horizontal type structure full cut type flexible connection deformation joint, main structure from the bottom plate, the tank wall, roof and channels are divided into 12 single independent and intact flexible deformation between adopts steel edge chloroprene rubber waterstop connection.

2  特點
2 features
2.0.1  鋼邊氯丁橡膠止水帶是在傳統橡膠止水帶基礎上發展起來的一種新型材料，通過在橡膠止水帶兩翼設置兩片鋼片，可有效解決橡膠與混凝土熱脹冷縮不同步的問題。
2.0.1 steel side chloroprene rubber sealing strip is a new material developed in the traditional rubber sealing belt on the basis of the rubber zhishuidai wings set two piece of steel, rubber and concrete can effectively solve the synchronization problem of expansion and contraction.
2.0.2  鋼邊氯丁橡膠止水帶一般是與結構變形縫或引發縫一起設置的，它不僅可以達到止水的目的，還可以承受相鄰板塊約40mm以內的錯位而不會出現拉裂，從而加強止水性能的發揮。

2.0.2 steel side chloroprene rubber waterstop structure is generally associated with deformation joints or lead joints set together, it can not only achieve the purpose of water stopping, can also withstand the adjacent plate within about 40mm dislocation without fracture, thereby enhancing the sealing performance of the play.
3  適用范圍
3 scope of application
適用于各類蓄水構筑物的鋼邊氯丁橡膠止水帶完全變形縫和橡膠止水帶變形縫的施工，也可為其它形式的半完全變形縫施工提供參考。
The utility model is suitable for the construction of the full deformation joint of the steel chloroprene rubber sealing strip of the steel lining of various water storage structures and the deformation joint of the rubber water stopping belt, and also provides reference for other forms of semi complete deformation joint construction.
4  工藝原理
4 process principle

鋼邊氯丁橡膠止水帶在大型蓄水池結構變形縫或引發縫起止水、隔水作用。施工時通過模板的夾持與定位鋼筋的協同作用，保證鋼邊氯丁橡膠止水帶處于設計的位置。底板中與池壁中的鋼邊氯丁橡膠止水帶應連接成一個整體，接頭處鋼板間采用鉚釘連接，橡膠采用熱熔連接的方式。施工中被鋼邊氯丁橡膠止水帶分隔開的區塊必須錯開施工，如先施工A區塊，則與之相鄰的B區塊必須待A區塊混凝土成型后方可進行（如圖4.1示）。整體成型后，池內外的水**被鋼邊氯丁橡膠止水帶相互阻隔開來
The chloroprene rubber sealing strip on the steel plate can stop water and prevent water from cracking in the large reservoir structure. During the construction, the joint of the formwork and the positioning steel bar is used to ensure that the neoprene waterproof belt on the steel edge is in the designed position. In the bottom plate and the steel wall in the tank wall, the neoprene water stop belt shall be connected into a whole, and the rivet joint shall be used between the steel plates at the joint, and the rubber shall be connected by hot melt connection. In the construction, the blocks separated by the steel neoprene belt must be staggered. If the A block is first constructed, the adjacent B block must be made before the concrete forming of the A block (shown in Figure 4.1). After the whole molding, the water inside and outside the tank is separated by the steel lining, neoprene and water stop